Smart design supermarket useful security fog machine anti theft smoke fog alarm generator system
FNFOG -the proactive protection system
What can't be seen, Can't be stolen!
Product Paramenters
Specifications
> Emission time: 20 secs
> Saturation area: max. 150 cubic metres
> Electrical power supply: not required
> Activation: electrical impulse (min. 3 Volt)
> Detonation energy (guaranteed activation): 2.5 mJ/Ohm
> Current required (guaranteed activation): 1 A
> Minimum impulse time (guaranteed activation): 100 ms
Vent hole
1
Coverage
150~200m³
Smoking time
≥ 18 s
Duration
>60min
Smoke angle
Pan Range :0~360°
Tilt Range:-90°~+90°
Operating Voltage
≤ 1A ,12V
Standby power
0W
Operating Conditions
-30°C~55°C,-10%~85% RHG
Weight
0.9 ( Kg )
Dimensions
158×108×80 ( mm )
Products Description
Features :
High quality fog generator produces non-toxic fog from solid raw material.
The non-corrosive fog can be natural degraded.
To ensure the safety of person and key equipments, the fog temperature and density is controlled under the critical confine.
Ease installation and maintain.
Fog can stay in the air for 60 minutes in enclosed space.
With special scent and fluorescent , the fog attached in the cloths can assist the police to track a suspect.
A variety of startup modes approved. The fog generator can be seamlessly integrated with
other security products.
Ultra-low power consumption.
Anti-sabotage impact-resistant metal shell.
The limits of existing fog generator
01 Dimensions
The size of the existing fog generator is relatively large, which requires a relatively large space. It is also relatively heavy, and the strength of the wall must be considered during installation
03 Power consumption
|t consumes about 1.2 KW during operation and about 200-300 W during tandby. At the same time, long-term power supply will also bring fire hazards.
02 Complex wiring
There are many connecting cables of the existing fog generators, especially the internal complicated circuits, which brings troubles for later repairs and maintenance.
04 Price
Because the manufacturing cost is too high, the sales price is expensive, which limits its use in the market.
The FNFOG project
FNFOG is intended to be just as effective as a smoke discharging system, but without the limitations, as:
It is no bigger than a drinks can
It requires just two wires
It does not require an electrical
power supply
There is no electrical current
consumption
It is decidedly lower in price
Why Choose US
A.The only legal product in China
It is the only one in China that has been licensed by the government.
B.The company has a long history
Our security business has been in business for 20 years.
D. Most patents
We have more than 20 patented technologies.
E. Many users
We have served more than 100,000 users.
How it works
FNFOG fog generator, in just a few seconds, saturate an area of 150 cubic metres through the production of a large amount of smoke. The smoke is non-toxic and does not leave any traces, while the single-use cartridge requires just a few minutes to change.
The wiring consists of just two wires, making installation and servicing extremely quick and clean.
The perfect alarm
solution
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Instructions for using
Please read the instructions carefully before starting the installation.
Installation and maintenance should only be carried out by qualified personnel.
1.Install the product in the walls to the recommended distance of 2.5 meters high or installation not exceed 3 meters from the ground.
2.Please direct the smoke towards the goods or the area to be protected.
3.Attention: The product must be connected to a certified alarm system.
4.During the maintenance and installation phases, do not stand near the smoke exit hole.After supplying do not touch the device because it is extremely hot!
5.During the entire installation phase keep the wires short-circuited, following the procedure described.
6.Connect the electric wires(means of igntion) to the alarm output (non-polarized continuous voltage) of the anti-theft control panel, respecting the electric current value required for ignition.
7.Before you connect the smoke generator, at the end of the test the product using a light or sound source.